Over 500 Vehicles Coated


Clearwater Car Owners, is your car lacking shine? Did you know that washing a ceramic-coated car is at least 50%* easier? Let us coat your vehicle so you can have ease of washing & unmatched shine for years to come!

Ceramic Coating Shop clearwater

Protect Your Paint for Years With Our Ceramic Pro 9H Coatings

We have packages that range from 6 months to a Lifetime of protection. We have solutions for paint, wheels, glass, & interior surfaces all using Ceramic Pro products (A Global Leader in Surface Protection).

Fill out our form or call us directly for a quote at (727) 667-0168.



Ceramic Coatings VS Paint Protection Film (Clear Bra)

Ceramic Coatings create a layer of protection that is transparent, highly durable and lasts for years, unlike traditional wax.

This new technology also known as “Nano-Ceramic Coatings” has been developed for those looking to get more longevity out of their finishes on automobiles or other vessels such as RV’s, boats, motorcycles, etc., by creating a protective barrier against anything from saltwater corrosion to scratches caused by everyday dirt due to its durability and transparency.

Ask about our Paint Protection Film & Window Tinting services as well!

Do You Want Your Car To Look Like This?

This amazing level of gloss can only be achieved by ceramic coatings. No wax or “ceramic spray” can compare to our 9H Ceramic Coatings for Cars Fresno. Not only do car coatings make your car this shiny they also last for years!



Ceramic Coating Pure Precision Clearwater Tampa Bay Florida

Ceramic Coating Packages

6-12 Months of Protection – ceramic pro Sport


SUV/Trucks $499

2 Years of Protection – ceramic pro bronze 


SUV/Trucks $899

5 Years of Protection – ceramic pro bronze 


SUV/Trucks $1,399

7 Years of Protection – ceramic pro Silver PLUS


SUV/Trucks $1,599



You found your self searching "ceramic coatings Clearwater, FL" and had a few questions before you pull the trigger. Here are the most frequently asked questions about our ceramic coatings for cars.

What is Ceramic Coating? Industry-grade ceramic coating is a chemical polymer solution that is applied to the exterior of a vehicle to protect it from external paint damage. Typically applied by hand, it blends with the paint of your car and creates an additional hydrophobic layer of protection.

Installing a ceramic coating is an extremely tedious process. Below is a breakdown of how ceramic coatings are installed.

100% Hand Car Wash
Using PH neutral soap and a clean wash mitt and safe towel to dry.
Paint Decontamination
Clay bar treatment to mechanically decontaminate the paint followed by a chemical decontamination with iron removers.
Labor intensive Machine Paint Correction
We must make your car’s paint as close to perfect as possible so that we don’t seal those defects under the coating.
Surface Cleansing Coating Prep
We apply an alcohol-based cleansing solution to give the coating a proper surface to bond too. Unlike wax coatings bond to your clear coat.
Tedious Panel by Panel Installation
We apply the coating panel-by-panel with an applicator and special soft towels to prevent further damage.

Ceramic coatings last anywhere from 6 months to 7+ years depending on the formula & the quality of the installation. Many coatings fall short of their expected time because they are not installed by a professional shop.

The cost of a ceramic coating ranges from $549 – $3000 depending on two factors. How much paint correction is required & how much durability is desired. Also, the larger the vehicle the more the price goes up since there is more surface area to polish & coat.

Removing a ceramic coating requires labor intensive cutting and polishing with a machine polisher, pads, and abrasive compounds. You must be very careful to not go past the clearcoat.

Think about wax and ceramic coatings as two different roads that lead to the same destination. They are different materials that perform the same task: protect your vehicle’s exterior surfaces. Both provide a sacrificial layer that is intended to shield your car’s surface from sun exposure, moisture and environmental pollution. Wax is the old, winding 2-lane road that leads into town and ceramic is the new, 6-lane wide expressway that gets you there in half the time.

The best way to maintain a ceramic coating is to hand wash your vehicle using a PH balanced soap diluted properly. You should consider drying the vehicle with a blower or extremely soft towel with little pressure.

Improved formulation to increase the resistance of water spotting on coated vehicles

Water contact angle that surpasses 110° and retaining close to this angle for a long periodDEEP GLOSS
Unmatched gloss that lasts years.

Surface stays clean for a longer period thanks to the anti-fouling effect